Prorat Proconnective Help

[Mike1990]

Hello,

I need help in getting notification's in prorat, i've got No-IP and it updates the ip from the DUC. Then click the button so the proconnective to listen for connections and there are no people online.

I know i've got people online because i get the cgi notification.

Help would be appreciated.

[saheera888]

To use ProConnective you have to click on ProConnective button that is on the ProRat client and then press on the "start listening the connections".

ProConnective will be created right next to the ProRat client and it will start to run.

If windows XP internal firewall is running on the PC that ProConnective is started, ProConnective will not work because the internal firewall will stop it to work.

So this is why ProConnective will open a warning message to you and ask that would you like to close your internal firewall.

If you press the "Yes" button ProConnective will close your internal firewall and will start to work normal.

If you press on the "No" button ProConnective will warn you that it will not work properly and will ask you if you are sure to continue and it will not work properly if you continue. It depends on you to make ProConnective work properly.

Also you have a choice to select "Start ProConnective on startup" which will run ProConnective every time you open your windows operating system.

To use ProConnective you have to own a static IP address or a dns address.

If you don't have a static IP address and if you are a connecting with a dial up and your IP address is changing every time you can get a DNS from No-Ip.com for free and direct it to your IP and you can use the product "DUC" to see your current IP.

So every time you get online the "DUC" program will process your WAN IP to the No-Ip.com DNS address that you gave when you created your server, so when your server gets online it will be directed to your DNS to get communication with ProConnective. (Example: "test.no-ip.com") and the "DUC" program will always refresh this dns target so your WAN IP will be directed to ProConnective. Click here to get more information about a free membership on No-Ip.Com and information about the "DUC" program.
________________________________________
house painter massachsuetts (http://www.housepaintermassachusetts.com)
Scottsdale Foreclosures (http://www.scottsdalelenderforeclosure.com)

[Mike1990]

Thanks for the reply but i've done all that and when i run proconnective it just shows a black screen. I'm on the internet through connecting my phone to my laptop.

[Mike1990]

I need help guys, really need this sorted. Would really appreciate it

[gordo]

are you direct connecting or reverse connecting?

[Mike1990]

I'm doing both, depends on if the victim is behind a router or not. One of them is, and i know they are online as i get the cgi notification with the 192.168.x.x. I've got the reverse connect method checked too, when i created my server i checked the reverse connect with my dns no ip address.

[gordo]

If you can't reverse connect, it may be the way you connect to the internet, through the phone. Check at canyouseeme.org to see if the ports are open/forwarded correctly

[Mike1990]

It says that they can't see the service on my ip on port 5110, but i go on the checkip service they have and it says my ip is x.x.x.195 but on the no ip program it says x.x.x.194

[gordo]

You need to get your port 5150 open. If you are connecting through a cell phone I don't know how to do it.

[Mike1990]

Thanks :) really appreciated

So it's not that the no ip DUC tells me i got one ip then that website tells me i've got a different ip but similar? it tells me i've got a different ip but similar on the no ip website

[gordo]

forget no-ip for now. All no-ip does is redirect the server connections to you. When you update the with the no-ip client, no=ip sends the connections to your current external ip address.
But you need to get the port open to receive the connections. The easiest way is to connect through a modem and a regular isp, not a cell phone. The phone connection is probably preventing the port from being open/seen

[Mike1990]

Thank you for the help :)

[sabeena]

If you viewed the information written above and created your server with your WAN IP or the DNS which you got from no-ip.com and executed it on your target PC.

You will see a list of IP's connected on the ProConnective main screen when your server is online and communicated with ProConnective.

In the ProConnective IP list you will see a "Direct Connection" icon next to the IP address if the IP is from a WAN address or if its one of your own LAN IP. With these kinds of connections you can connect reverse and normal ways. Right click on the IP address you want to connect to and select "Connect Reverse" or "Connect Directly"

If the server which is connecting using a gateway which means its behind a network or a router will have a "Gateway" icon next to that IP. Double click on that WAN IP and you will see a list of how many servers are working on that LAN IP and select which one you want to connect to with a reverse connection type.
__________________________________________________________________
pattaya holidays (http://www.bestatthailandholidays.co.uk/pages/pattaya/)
sustanon deca (http://www.buyonlinesteroids.com/purchase-cheap-deca-durabolin-for-sale/)