zabbix
+ Reply to Thread
Results 1 to 2 of 2

Thread: Software that works like Fluke Net Tool

  1. #1
    Join Date
    Mar 2019
    Posts
    5

    Software that works like Fluke Net Tool

    At my job we have a Fluke Net Tool that, among other things, is very handy at identifying what port you are pl***ed into. For example, if you are at an end users desk, and the wall plate is not marked, you can plug in the net tool with a patch cable and run a scan. It will tell you what switch you are pl***ed into, the IP of the switch, the port on the switch you are on, and the VLAN.

    These are expensive tools and it seems that we have a need for another one.

    My question is: Have you ever seen any software (free would be good), that you can run on a laptop that will perform this simple function?

  2. #2
    Join Date
    Mar 2019
    Posts
    5

    Software that works like Fluke Net Tool

    At my job we have a Fluke Net Tool that, among other things, is very handy at identifying what port you are pl***ed into. For example, if you are at an end users desk, and the wall plate is not marked, you can plug in the net tool with a patch cable and run a scan. It will tell you what switch you are pl***ed into, the IP of the switch, the port on the switch you are on, and the VLAN.
    [url=https://testmyspeed.onl/]https://testmyspeed.onl/[/url] [url=https://scrabblewordfinder.vip/]Scrabble Word Finder[/url] [url=https://solitaire.onl/]Solitaire[/url]
    These are expensive tools and it seems that we have a need for another one.

    My question is: Have you ever seen any software (free would be good), that you can run on a laptop that will perform this simple function?

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts